Its body is made of stainless steel 304. The pot can be used for two purposes to realize wort filtration and separation of hops and trub. The tank includes upper and lower parts.
The upper part is the filtering part, which is provided with the heat insulation function. The lauter tun method is adopted to realize the filtration of wort. The filtering screen plate is an milled screen plate, made of stainless steel 304 with an interval of 0.7-0.9mm. The screen plate is precisely machined without deformation after long-time use. In order to realize good filtration, it can be equipped with a grain raking device. The grain raking device consists of motor, driving shaft, raker carrier and raker. The raker carrier is installed on the driving shaft. The raker inclination angle and quantity have been strictly calculated and designed. The annular grain washing pipe is installed at the upper part of the tank, so that the grain layer will not be damaged during grain washing.
下部是旋沉，主要用于分離熱凝固物，在麥汁過濾時又起到暫存作用。旋沉?xí)r麥汁以一定的速度沿切線管口進入，依靠慣性力旋轉一定時間，在離心力的作用下，酒花及熱凝固物聚在鍋體中央，從而實現與料液分離。The lower part is the whirlpool settling device, which is mainly used for separating trub and playing the function of temporary storage during wort filtration. During whirlpool settling, the wort enters along the tangent pipe mouth at a certain speed, after rotation with inertial force for a certain period of time, under the action of centrifugal force, the hops and trub are gathered at the center of the pot, so as to realize separation from liquids.
